PVC Conveyor Belt Joint Sleeve Usage and Steps - Guangyuan Ruifeng New Materials

Category: Conveyor belt

Release Time: 2020-04-22

Summary: The joint sleeve is an open-style left and right concave groove sleeve. The concave groove sleeve is divided into an upper and lower piece, with a thick glue layer on the upper piece and a thin glue layer on the lower piece. Both ends of the upper and lower pieces have a 20mm slope. The open-style left and right concave groove sleeves match the convex tenon joint body of the conveyor belt joint and form an integral connection structure. So how to use this sleeve to quickly and effectively complete the joint? Let's learn about the usage and steps of this product:

The joint sleeve is an open-style left and right concave groove sleeve. The concave groove sleeve is divided into an upper and lower piece, with a thick adhesive layer on the upper piece and a thin adhesive layer on the lower piece. Both ends of the upper and lower pieces have a 20mm sloped surface. The open-style left and right concave groove sleeves match the tenon joint body of the conveyor belt joint and form an integral connection structure. So how can this sleeve be used to quickly and effectively complete the joint? Let's learn about the usage and steps of this product: (Crosslinking agent used for PVC conveyor belts)

1. Making the tenon

According to the length of the upper and lower pieces of the joint sleeve, peel off the rubber on both ends of the belt to be joined accordingly to form a tenon; when peeling and cutting, be careful not to damage the fabric (canvas layer). For novices without peeling experience, you can use a deburring machine or a polishing machine. (Crosslinking agent used for PVC conveyor belts)

2. Applying the adhesive

(1) Clamping: First, clamp the two ends of the upper piece of the joint sleeve together (you can use wire or rope to tie the joint sleeve screw holes together) (Crosslinking agent used for PVC conveyor belts)

(2) Dust removal: Clean the dust from the inner surface of the joint sleeve. (Crosslinking agent used for PVC conveyor belts)

(3) Brushing: Repeatedly brush the adhesive (conveyor belt cold joint adhesive) on the inner upper and lower surfaces of the concave groove sleeve and both sides of the tenon joint body. (Crosslinking agent used for PVC conveyor belts)

3. Assembly and bonding

Operate when the adhesive is basically dry (the best time is when the adhesive is not sticky to the touch).

(1) Covering: To prevent the joint body from sticking to the concave groove sleeve during assembly, cover each side of the tenon joint body with a clean nylon film or nylon cloth. (Crosslinking agent used for PVC conveyor belts)

(2) Align the lower piece first, then the upper piece: First, align the two end tenon joint bodies with the lower bottom piece of the joint sleeve, ensuring that the joint sleeve and both ends of the belt are completely straight, then remove the nylon film from the lower piece and bond it in place. Then remove the nylon film from the upper piece, release the clamped upper piece, and press it tightly (press from the middle to both sides). (Crosslinking agent used for PVC conveyor belts)

4. Bolt tightening

(1) Drilling holes: According to the pre-determined hole positions on the joint sleeve, use an electric drill to drill holes of the same size vertically on the belt. (Crosslinking agent used for PVC conveyor belts)

(2) Tightening bolts: Insert the special "dedicated internal threaded belt fixing screws" into the holes on the joint sleeve, and use an Allen wrench to position and tighten them. (Crosslinking agent used for PVC conveyor belts)

5. Sealing

To prevent the joint sleeve from warping during operation, a layer of adhesive can be brushed on the edge of the joint, and a row of "barbed sealing nails" can be hammered on. (Crosslinking agent used for PVC conveyor belts)

Guangan Ruifeng New Materials Co., Ltd. specializes in the production of crosslinking agents used for PVC conveyor belts. We have mature production processes and can definitely meet your needs. Welcome to discuss business!

Keywords: PVC Conveyor Belt Joint Sleeve Usage and Steps - Guangyuan Ruifeng New Materials

Related Solutions

Previous: No more!

Next: Conveyor belt adjustment and repair - Guangyuan Ruifeng New Materials

Guangan///Guangyuan,Guoyuan///Guangyuan,Ganguan///Guangyuan

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home